Any idea for the effect of heat generation with nanofluid in porous cavity?

More Khaled Al-Farhany's questions See All

We are working on different projects in our CFD group. what is the best way to make the work growing up quickly?

We are working on different projects in our CFD group. what is the best way to make the work growing up quickly. do it in small teams for each project or work together??

06 July 2018 7,291 15 View

What is the importance of vacuum the rock core sample before saturation?

I am performing core flooding experiments as a research work. I started by initially saturating the core sample by the crude oil (Stock tank oil). However, I did not do enough vacuuming of the...

03 April 2018 9,191 4 View

For open channel fluid flow; at any Re can amusing the heat convection is natural???

01 February 2018 5,971 12 View

As I Know, the nanofluid will increase the heat transfer if used as a working fluid, but how much it ?

As I Know, the nanofluid will increase the heat transfer if used as a working fluid, but how much ..

01 February 2018 7,009 24 View

How can added the nanofluid in COMSOL?

01 February 2018 1,808 12 View

Whats the nanofluid and how we can model it with natural convection in Fluent?

Whats the nanofluid and how we can model it with natural convection in Fluent

01 February 2018 3,956 10 View

How we can model nanofluid with porous media and what is the best CFD software ?

01 February 2018 939 6 View

How can change Richardson number (Ri) in FLUENT???

how can change Richardson number (Ri) in FLUENT??? by changing the Temperature or velocity????

18 January 2018 4,391 6 View

In COMSOL how to add fluid flow Heat transfer through Porous media?

In COMSOL how to add fluid flow Heat transfer through Porous media

31 December 2017 4,470 5 View

Can we add the effect of Porous media in fluid flow as source term only?

Can we add the effect of Porous media in fluid flow as source term only >>> In FLUENT for example

31 December 2017 9,349 6 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Anyone that can help with Maxquant TMT16plex which is missing?

Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...

25 February 2021 1,675 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

Model Volume fraction and magnetic field applications of nanofluids in ANSYS?

Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...

22 February 2021 961 2 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

Mohammed saad Kamel

Dear Dr. Khaled, please look at this review paper for Dr. Omid and his team it is very interesting. I think it will be very useful. Regards.

Vivek Kumar

Please see the file.

Convection of Cu-water Nanofluid in a Partially Active

Porous Cavity with Internal Heat Generation

http://www2.tku.edu.tw/~tkjse/19-3/09-ME10504_0008.pdf

Hamit Can

Khaled Al-Farhany

Dear Mohammed saad Kamel ,

thanks for share the paper.

Regards

Many thanks Vivek Kumar