Instrumentation Engineering

How could a heat exchanger be designed based on M Cycle?

I am working on an innovative design of heat exchanger for making an efficient indirect evaporative cooler.

12 December 2013 6,231 0 View

Can someone advise on connecting triaxial rosette strain gauge to miniature data logger with winston bridge for measuring stress of rotating impeller?

If you know the answer please elaborate it with figure. And also provide list of equipment used for that purpose

28 August 2013 6,123 7 View

Can someone advise on connecting triaxial rosette strain gauge to miniature data logger with winston bridge for measuring stress of rotating impeller?

If you know the answer please elaborate it with figure. And also provide list of equipment used for that purpose

08 August 2013 3,905 8 View

Svm simulink model

Where we can get a clear expl and simulink model of spacevector modulation technique?suggest some links

25 December 2012 8,785 1 View

Svm simulink model

Where we can get a clear expl and simulink model of spacevector modulation technique?suggest some links

12 December 2012 7,773 1 View

Design considerations for the implementation of a front end sensor for Surface Electromyograph acquisition??

I have tried to design an surface Electromyograph front end sensor, using the TI INA118P instrumentation amplifier IC with a stage 1 gain of 20...followed by two filters ( a high pass filter of...

02 February 2012 8,437 1 View

How effective is a lead compensator in dealing with time delay in the forward path of a system?

I know that compensators are used for modifying the gain/phase characteristics of a system in the open loop. I would like to know how useful is it in dealing with the dead zone/time lag/ time...

01 January 1970 741 5 View

Which current and voltage sensors have excellent accuracy and response time ?

For high power applications we need a sensor which sensor is good. 

01 January 1970 2,070 6 View

Is Wavelet Transform method suitable for this project without introducing any delay since this method has to be applied on online signal changes?

How could this method be applied? Please provide details for higher and smaller fluctuations based on scale? How do i decide the cut off frequency using this method?

01 January 1970 4,394 0 View

Changing the offset of wavelets to 50 rather than 0 value

Is it possible to change the offset of a wavelet that is from 0 to 50 value and continue with analysis with 50 as base x.axis ? or is there any suitable way to cover 100% swings in signals...

01 January 1970 5,077 1 View

Can we integrate a Quadcopter into WSN for Environmental Monitoring.Can it be useful for live Video streaming when anything abnormal happens?

Mahesh Kumar Guin 4th Year Electronics & Instrumentation Engineering Working on B.Tech project to integrate Quadcopter Applications with WSN for Environmental Applications in Smart Cities

01 January 1970 1,474 1 View

How to extend battery life of a quadcopter /mini drone with Payload?

As we know that larger the battery capacity, the longer your drone can function in one single charge of it. Small drones are normally best suited for 20 to 30 minutes flight.Our requirements are...

01 January 1970 7,523 9 View

How effective is a lead compensator in dealing with time delay in the forward path of a system?

I know that compensators are used for modifying the gain/phase characteristics of a system in the open loop. I would like to know how useful is it in dealing with the dead zone/time lag/ time...

01 January 1970 4,546 4 View

No title

01 January 1970 3,118 0 View