4 Questions 9 Answers 0 Followers
Questions related from Sumit Dubal
I did carbonization of PAN Electrospun nanofiber at 900 C under the flow of nitrogen but SEM images of Carbonized samples are showing bead formation and fiber reduction from 700 nm to 150 nm. what...
01 August 2021 9,091 7 View
Hello, I used a tube furnace for carbonization of polyacrylonitrile nanofiber mat at 1000C under the flow of Nitrogen with a heating rate of 5 degrees per minute, and dwell time was 1h at 1000 C....
01 August 2021 8,541 0 View
Please find herewith attached FTIR of Polyacrylonitrile nanofiber mat before stabilization and after stabilization (at 290 C with 2 degree/min heating rate and isothermal treatment at 290 for...
06 July 2021 9,469 3 View
I have as-spun PAN electrospun nanofiber mat prepared using electrospinning. For stabilization/carbonization, should I peel off that fiber mat from aluminum foil and keep in the furnace or I can...
12 October 2020 6,971 4 View