6 Questions 92 Answers 0 Followers
Questions related from Sujit K. Biswas
In two-stage Cascaded Boost converter, there are two switches, but one has low voltage + high current while the second has high voltage + low current. In Quadratic converter, the single switch has...
03 March 2015 9,558 5 View
Assume that transformer is needed for voltage matching but electrical isolation is not mandatory. It is understood that the line currents on 3-phase will not be balanced, but what is the best...
02 February 2015 4,009 12 View
The width and placement of the duct is important for cooling as well as for the minimum length of copper per turn. A wider duct gives better cooling but also increases the length of subsequent...
07 July 2014 9,926 6 View
High current high frequency transformers and inductors are wound with copper foil. Sometimes, foils also have to be paralleled to handle the rms current. Thus, the inner foil always carries the...
07 July 2014 7,433 5 View
High power DC linear power supplies are needed for application like testing of aircraft equipment, high stability power supplies etc. They are made using bipolar transistors or MOSFETs operating...
05 May 2014 1,751 21 View
It is understood that higher frequency can reduce size of magnetic materials to some extent but why specifically 400Hz ? Why not at some other value of frequency ?
05 May 2014 5,595 2 View