Shanti Kiran Zhade

5 Questions 4 Answers 0 Followers

Questions related from Shanti Kiran Zhade

Is it possible that the experimental vlaue of UTS of FRP reinforced with nanofiller can be higher than the UTS calculated through rule of mixture?

Dear researcher, Is there a chance that experimentally obtained ultimate tensile strength (UTS) of fiber reinforced polymer (FRP) reinforced with nanofiller can become higher than the value of...

06 January 2020 1,688 1 View

Is Taguchi optimization technique is suitable to optimize the nanofiller content, fiber content, angle of fibers for tensile strength?

I have selected the above three parameters and three levels each based on pilot experiments to optimize for the highest tensile strength but one of my professor said that Taguchi is not a suitable...

17 December 2018 8,444 2 View

I have got R2 = 98% for a linear model generated by Taguchi method, is it wise to do Response surface methodology further for quadratic model?

I have got 98.16% of R2 value for the linear model generated for my experimental design of L9 orthogonal array using Taguchi method. Further I also performed Response Surface Methodology (central...

17 December 2018 8,087 4 View

Does the overhanging length of the sample effect the flexural properties of the glass epoxy laminate?

My samples were of different thickness i calculated the span as per ASTM D790. But iam not sure what should be the overhanging on both sides. Does overhanging length have effect on the flexural...

03 February 2017 1,028 4 View

The least thickness, of the polymer composite, that can be made by hand lay-up method to evaluate tensile and flexural properties ?

Polymer composites

11 August 2016 3,124 2 View