Rajamani A. R.

6 Questions 12 Answers 0 Followers

Questions related from Rajamani A. R.

How can select a Reference Electrode for Electrochemical System?

We have number of reference electrodes and number of electrochemical systems. So how can we select a specific Reference electrode?

11 November 2014 1,922 12 View

What is the difference between a copper electrode and Nickel plated copper electrode for Tin (IV) Chloride in HCl bath?

Actual Tin reduction is nearly - 0.8 V. The peak of -0.1 V is the weather HCl reduction or any other reaction occurs. If I use Ni plated copper electrode -0.1 V peak is not appearing why? Fig:...

07 July 2014 5,948 3 View

How to clean copper electrode?

Procedure for copper cleaning.

01 January 2014 5,469 2 View

What difference does it make if I use gas purging or not during electrodeposition?

What is the role of gas purging?

01 January 2014 8,887 3 View

Rotating disk electrode (RDE) for alloy system?

I did RDE for an SnBi system, but there is no change when I increase rpm. How do I use RDE for an alloy system?

01 January 2014 5,695 6 View

(10mM K4[Fe(CN)6] + 1M KNo3) using electrolyte for GC electrode preparation comes to ∆Ep = 120 mV, how to reduce it to 60 mv?

Procedure: Polishing electrode with 0.05 micron powder around 10 to 15 min. Sonicate with acetone & water then run the CV segments: 2, potential: (-0.2 to +0.6)

06 June 2012 2,713 28 View