6 Questions 26 Answers 0 Followers
Questions related from Raghavendran Srinivasan
i attempted to measure voltage at a point by opening and closing a switch with interrupt in arduino uno board. i need to measure the voltage after 100 ms from the instant of opening of the...
09 September 2017 6,514 4 View
In a buck converter, the voltage across the mosfet (VDS) is ringing with only gate pulse(VGS) is applied but no power supply is applied. Inductor is 1mH, output capacitor is 100uf and load...
02 February 2017 3,536 11 View
I need to calculate the force on the surface of the venturi(marked as red in figure) in the direction (marked as orange in figure), when air flows through the venturi.?
08 August 2016 1,721 7 View
Instead of using two individual inducotrs i want to use coupled inductor in psim. it is mentioned in psim that self inductance and coupling factor parameters for coupled inductor. how to choose...
06 June 2016 2,276 8 View
voltage control scheme of inverter is followed in standalone PV system and why not the current control scheme like in grid connected PV system
02 February 2016 8,520 9 View
in simulation,while connecting a battery directly at the output of the boost converter, the battery is discharging the current during off period of mosfet switch instead of output capacitor of the...
01 January 2016 7,859 7 View
