8 Questions 1 Answers 0 Followers
Questions related from Manoj Samal
I possess a continuous disc-type transformer consisting of 40 discs. Utilizing the geometrical dimensions of the transformer, I computed the impedance parameters for a ladder model. However, upon...
29 March 2024 4,323 2 View
I want to divide the electrical circuit depicted in figure-1 into three separate circuits (ckt-1, 2, and 3) as indicated by the red box, as well as locate equivalent capacitance for ckt-1 and 3...
13 May 2023 8,897 0 View
Dear All I want to obtain a maxwell capacitance matrix of order (400x400) for my COMSOL model (in 2d-Axi geometry). While I run my simulation on a system with 16 GB RAM size, it is showing out of...
20 April 2023 8,893 0 View
How to find out the self and mutual inductance of a transformer winding having N number of turns and discs in COMSOL. I have found out by taking 1 Amp of current to one coil and 0V to all the...
22 May 2021 6,639 2 View
Dear Sir/Madam I want to use Sine voltage as a source in an RLC circuit. I want to study the driving point impedance with frequency sweep. But when I use sine voltage, I get an error like The DAE...
14 January 2021 10,454 5 View
I am trying to find out the inverse Laplace transform of the state transition matrix obtained using inv(S*I-A). Where I is the identity matrix, and A is a state-space matrix(24x24 matrix). I have...
22 December 2020 7,238 3 View
What are the initial values of different ion concentrations(Electron,+ve and -ve) should be taken while simulating the partial discharges between different electrodes(point-plane, point-...
12 March 2020 6,433 4 View
I want to use a switch in my circuit (in COMSOL) which will be ON after a certain time. So what are the switch settings for switch type and switching time required? For example, I have a simple...
01 January 1970 736 1 View
