Hamid Moaieri

10 Questions 26 Answers 0 Followers

Questions related from Hamid Moaieri

Hoe to simulate stability of drydocking in maxsurf?

all know the stability of ships in dry-docking has critical period. the maxsurf suite can simulate the stability behavior in many case of loading and damage scenario. now, How to simulate...

07 March 2024 3,821 0 View

What are the EOS parameter of clay for material modeling in CEL type in Abaqus?

Hi i need the EOS(equation of state) parameter of clay for material modeling in CEL (Euler type) type in Abaqus. i try to modeling the uplift force for removing rigid object from seabed clay.

28 April 2022 4,979 1 View

CAN Buoyancy force modeling in ABAQUS?

How to model the Boeing force in Abacus? Or considered border conditions to equate it? Is this possible without the use of subroutine?

21 April 2022 1,760 4 View

What is my mistake in my tnt explosion modeling with ABAQUS?

If you read the Kevorkian paper(attached), the over-pressure in experiment about 60bar at K4 sensor. But in my model (attached) with CEL technique, this pressure is near 20 bar. so,if you know,...

17 January 2018 8,454 4 View

Who know about considering chapman-jouguet pressure in tnt air explosion modeling?

HI HOW CAN I CONSIDER THE "CHAPMAN JOUGUET" PRESSURE IN ABAQUS MODELING FOR TNT AIR EXPLOSION?

30 December 2017 152 3 View

How can I model heat and tempreature in TNT-AIR-Steel plate explicit analysis with abaqus?

I've been try to model explosion of TNT in Air(Eulerian model) and steel plate(Lagrangian) for finding the plate central node displacement and compare with Conwep blast analysis result. without...

11 August 2017 4,296 1 View

How can i model two type of load in same time affect on a plate in abaqus?

hii would analysis effect of impact lateral load(dynamic-explicit) on a plate that pre loading with in plane compression load. how can i model two type of load in same time affect on a plate in...

12 July 2016 5,358 1 View

How can i modeling a real fragment(due warhead explosion) impact with abaqus?

for analysis the ultimate strength of a stiffened plate damaged with warhead explosion,i need to model a real fragment shape and.... how can i modeling a real fragment(due warhead explosion)...

29 June 2016 4,537 3 View

How can i define damage zone and stressed area around the local high velocity fragment(bullet) impact on a steel plate ( in abaqus)?

how can i define damage zone and stressed area around the local high velocity fragment(bullet) impact on a steel plate ( in abaqus)? my study is modeling the fragment perforation with a drilling...

05 March 2016 3,174 0 View

Any advice on a 3d pressure profile?

hii need the 3d profile dynamic air blast pressure in a non venting confinement. who can help or addressed me about it?

17 December 2015 6,300 1 View