6 Questions 66 Answers 0 Followers
Questions related from H.-P. Schulze
Which processing method would use them to manufacture a hole with 200 microns in diameter and a depth of 150 mm? The precision is intended to + - are 50 microns.The processing time is also of...
08 August 2016 3,177 29 View
Basically, the thermal simulations of the electrical discharge plasma-foot point are performed using a uniform distribution with spreading foot radius or point assuming a Gaussian distribution....
02 February 2015 4,687 3 View
If we look at Powder Mixed Electrical Discharge Machining using nanoparticles and analyze, then we would not have to handle any electrical discharge machining because even the most removal-solid...
01 January 2015 4,901 10 View
One factor is the lack of knowledge about the process energy sources used and the process control used. I will give a lecture on the ESAFORM 2015 in Graz (15 to 17 April).
09 September 2014 9,640 1 View
Can you tell more about your project?Electrochemical processing is a bit too far-reaching. Even their references do not allow for more precise concretization. The best way to define a project at a...
01 January 1970 8,075 0 View
It should always be noted in such projects that the preparation of the working medium is much more complex and expensive than in the "normal" EDM.Also the production according to small powder...
01 January 1970 6,360 2 View