Emmanuel Nwaogu

7 Questions 2 Answers 0 Followers

Questions related from Emmanuel Nwaogu

Theorectical capacities of V2C Mxene. and V2AlC Maxphase?

Hello, I'm working on V2C Mxene. and V2AlC Maxphase. Please who can tell me the theoretical capacities of these materials above I can not get good cycling capacity after charge-discharge. I think...

18 August 2023 1,760 0 View

Hello Professionals, during slurry preparation for with electrode materials, Please how do i achieve i high mass loading of either cathode or anode?

for example, how to make some like 3.8-14.6 mg cm-2?

06 December 2022 5,546 1 View

Please How do i input this data in neware tester for depositing lithium on copper foam through discharging process only without charging?

For example: 0.4 mA h /cm2 of lithium was deposited on copper foam on current density of 10 mA/ cm2

25 November 2022 544 0 View

Please how do i deposit certain amount of lithium in mA h/ cm2 on a copper foam using Biologic tester or neware charge discharge tester?

For example Then 1 mAh cm−2 of Li was plated on the current collector at a current density of 1 mA cm−2 and the cutoff potential for the discharge process was set to 1.0 V.

25 November 2022 1,860 0 View

Hello, Please how can i obtain lithium plating and stripping on cu foam current collector?

In my project i want to check the amount of lithium is able to deposit on the cu current collector after plating using Biologic tester or any other tester.

08 November 2022 2,075 1 View

Electrolyte Preparation for Anode-less lithium ion battery.

Please how can i prepare my electrolyte with respect to the amount of solvent. For example how much solvent is required to prepare 3M of LPF6 lithium salt with EC/EMC (1:2 v/v) solvent?

01 January 1970 6,890 2 View

I want to conduct Lithium deposition on current collector via discharging process

How can one control the capacity loading of Li at 0.1 mAh /cm2 with a current density at 10 μA /cm2 using Biologic Tester or Galvano static tester

01 January 1970 4,702 0 View