Amin Iranpour

5 Questions 18 Answers 0 Followers

Questions related from Amin Iranpour

What is the purpose of placing the shear tab at the upper part of the beam web in single plate shear connections?

Typical U.S. practice places the topmost bolt line 3 inches below the top flange of the beam. This placement of the shear tab within the beam web also increases the gap required to avoid binding....

12 December 2018 6,134 10 View

What are the feed-forward backpropagation neural network advantages over the other types of networks in artificial neural network?

There are different types of network creation functions which can be employed in artificial neural network such as cascade-forward network, competitive neural layer, distributed delay network,...

07 July 2018 6,152 7 View

How to determine the effects of creep and shrinkage on the prestress loss in precast segmental concrete bridges?

There are several specifications that provide equations to consider the effect of creep and shrinkage on the estimation of prestress loss. As some of the references state, creep and shrinkage...

12 December 2017 3,717 7 View

Is there any difference between the FE results of a steel material under monotonic load for two different hardening models (isotropic and kinematic)?

In order to model steel material in finite element software, different types of hardening plasticity can be used. Using these methods lead to different response when the material undergoes cyclic...

06 June 2017 9,610 5 View

Is there any relationship between tensile rupture strain and shear rupture strain of steel?

There are many experimental results which present the tensile rupture strain of steel but I could not find any reference to get the shear rupture strain of steel. I need both of them to define a...

10 October 2016 2,218 10 View