Ali Shoari

5 Questions 15 Answers 0 Followers

Questions related from Ali Shoari

Why the Load-Displacement output didn't match to experiment's data (Abaqus)?

I tried modeling a simple 4 point bending test in Abaqus, but unfortunately, the load-displacement curve was ascending and the crack and final load didn't match the experimental data. I used...

06 April 2021 8,843 6 View

Which aggregates have a high water absorption?

Hello. Which aggregates have a high water absorption while they have a desirable strength too? If you can suggest me a paper contains mentioned data, it will be a great help. thanks.

27 July 2019 1,421 3 View

How do you evaluate this hysteresis graph and how can I see the pinching on this output graph?

I modeled a SFRC coupling beam in the Abaqus using CDP and the response for lateral load-displacement is achieved as in the attached picture. Is this response acceptable? (The f'c of the model is...

01 January 1970 8,899 8 View

Why Cyclic compression test doesn't intersect the compression curve (ABAQUS CDP)?

I try to model a reinforced concrete coupling beam, as the push of cyclic response doesn't fit the experimental data, I modeled a cylindrical specimen under cyclic compression loading to observe...

01 January 1970 6,523 2 View

UMAT and VUMAT reference (ABAQUS)

I modeled a concrete coupling beam in Abaqus using CDP material. The cyclic response of the model does not contain pinching and proper strength degradation. According to suggestions, the best...

01 January 1970 8,105 1 View