I need to make some references
During gold extraction, silver is lost to the tailing as gangue, how do we recover the silver
01 January 1970 1,241 1 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Would anyone be interested in collaborating on corrosion?
07 July 2024 4,726 2 View
we need surface area, corrosion current, equivalent weight and density of the metal involved for corrosion rate calculation in mm/year (lets say). For dissimilar metal welds, how can we measure...
30 June 2024 5,943 2 View
I am working with a polysaccharide grafted on chitosan and my corrosive medium is 3.5 wt% NaCl. My surface is carbon steel. I am struggling to obtain a proper trend for my corrosion results. I am...
29 June 2024 5,592 1 View
Corrosion studies by electrochemical measurement.
19 June 2024 5,274 3 View
In recent years, the aerospace industry has greatly benefited from advanced materials like fiber-reinforced polymers (FRPs). These materials, made by combining a polymer matrix with fibers like...
25 May 2024 1,418 2 View
i need to know
17 May 2024 6,827 2 View
Dear all, One of the key points in TSAD (Time Series Anomaly Detection) when using a sliding window is the size of the window. For (quasi)-periodic time series, methods such as AutoPeriod,...
13 May 2024 920 3 View
I am working on corrosion test with an electrochemical jar test. Working electrode: Copper Reference electrode: Ag/AgCl with 3M KCl solution Counter electrode: graphite In the process of linear...
12 May 2024 9,453 1 View
