Which organic and inorganic chemicals absorbed by super absorbent polymers (SAP) other than water?

Ma Rahman Bhuiyan @Ma_Bhuiyan

07 July 2017 0 3K Report

SAP mainly absorb water. Which organic and inorganic chemicals can be absorbed by SAP?

Badges
Science topic

More Ma Rahman Bhuiyan's questions See All

What are the reasons for low substantivity of henna dye towards cellulosic fiber?

The dyeing of cellulosic fiber with henna dye is difficult and dye absorption is low due to lack of substantivity

05 June 2017 1,422 2 View

How can we improve the exhaustion of acid dyes on nylon fibers?

Nylon fibers are mainly dyed with acid dye. But due to the less number of amino (-NH2) group than wool (approximately 6 times lower) deep shade cannot produce by acid dye due to lower exhaustion.

11 December 2014 7,689 4 View

Polymer wear calculation?

What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?

04 August 2024 1,078 1 View

How to explain the different interaction between soluble and insoluble polymer in water?

Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.

29 July 2024 6,350 3 View

What is the difference between coordination polymer, MOFs, MCOFs?

Wherever I have referred, it puts me in a dilemma about the exact differences between these. It would be really helpful if someone can put me out of this trouble.

21 July 2024 3,045 3 View

Appearance of crystallization peak in heating cycle of DSC test?

For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...

18 July 2024 348 3 View

Interpreting ATR-FTIR Spectra for Microplastics Research?

Hello everyone, I am currently pursuing a PhD in Environmental Engineering with a focus on microplastic studies. My background is in Civil Engineering, and I am relatively new to working with...

18 July 2024 7,258 3 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

How do you decide an optimal AC amplitude for non-faradaic electrochemical impedance spectroscopy?

I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...

16 July 2024 5,031 1 View

Why am I seeing only one initial maximum in torque-time curves for the fusion of PVC in a Brabender?

We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...

12 July 2024 2,768 1 View

How can I do photodetector application from Inorganic nanoparticles compound?

I have an inorganic nanoparticle compound I want to do a photodetector application from this compound, I do not have any idea, can anyone help me with this?

11 July 2024 135 1 View

How to prepare polyaniline emeraldine salt ( PANI -ES) sample for Transmission electron microscope (TEM) analysis?

I need to do TEM analysis for my Polyaniline emeraldine salt form. May I know which solvent is appropriate for preparing TEM sample?

25 June 2024 9,086 3 View