I am looking for use cases of Group Communication using multicast in M2M communication. For example , group of lights being switched off or on by a single message .
Dear Anshul,
maybe these papers and RFC 7390 can help:
Experimental Evaluation of Unicast and Multicast CoAP Group Communication
Isam Ishaq, Jeroen Hoebeke, Ingrid Moerman and Piet Demeester
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4970179/#B11-sensors-16-01137
Multicast communication in wireless home and building automation: ZigBee and DCMP
Christian Reinisch, Wolfgang Kastner, Georg Neugschwandtner
https://www.researchgate.net/publication/224299485_Multicast_communication_in_wireless_home_and_building_automation_ZigBee_and_DCMP
RFC 7390: Group Communication for the Constrained Application Protocol (CoAP)
I wish you success!!!
Conference Paper Multicast communication in wireless home and building automa...
Dear Anand;
following paper might be helpful for you.
http://ieeexplore.ieee.org/document/7366358/
How about motion sensors being used to turn lights on in the room you are just about to enter, using IOT, and turning the lights off in the old room when you are far enough into the new one not to notice. This involves track prediction, possible IOT swarm processing?
Dear Anshul Anand,
Group-Communication has two parts:
1) Collecting data from a group.
2) Sending commands to a group.
http://ieeexplore.ieee.org/abstract/document/7293115/
- Badges
- Science topic
- Similar topics
- Engineering
- Telecommunications Engineering