Bridge design
The potential benefits of using the bridge form of precast prestressed
beams supporting in-situ concrete top slab are:
(i) For bridges built on top of rivers and carriageway, this bridge form
provides the working platform by the precast beams so that
erection of falsework is not required.
(ii) This bridge form generally does not require any transverse beams
or diaphragms (except at the location of bridge supports), leading
to reduction of construction time and cost.
(iii) It creates the potential for simultaneous construction with several
spans.
May be need to optimization or feasibility study.
https://www.youtube.com/watch?v=WLEkC_JbTsQ
03 April 2017 1,301 2 View
How we can design box girder bridge?
02 March 2017 10,163 3 View
Why 0.2 mm crack width?
02 March 2017 9,354 3 View
How does rust affect on the bonding between steel bars and concret?
02 March 2017 3,458 10 View
In normal concrete structures, 28-day test results are often adopted.However, in the construction of high-rise buildings using “High strengthconcrete”, compressive strengths based on 56 or 91-day...
02 March 2017 8,839 19 View
What about difference between those approaches regarding load and material safety factor?
02 March 2017 587 2 View
Relation between cubes and cylinder
02 March 2017 5,836 4 View
Non destructive tests
02 March 2017 5,452 31 View
Can we use same code provisions of columns for piles?
02 March 2017 7,906 3 View
Assume that there is no differential settlement.
02 March 2017 7,651 3 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...
20 July 2024 9,153 11 View
Recently I've been working on a simulation of concrete 3D printing, and has successfully simulated a layer-by-layer 3D printing process using model change. However, when I proceeded to try...
06 July 2024 2,130 0 View
What heavy aggregates are available for protective concrete in your country?
01 July 2024 1,625 3 View
What are the benefits and advantages of concrete flooring when used in parking lot floors, and what are the technical requirements and general specifications that should be considered to ensure...
29 June 2024 2,171 5 View
Dear colleagues, I'm currently modelling a simple 4-point bending test of a concrete beam in Abaqus. However, the load-displacement curve was ascending (without final point), which didn't match...
29 June 2024 6,192 2 View
I submitted my journal and got some comments, I have answered and corrected all the comments from the reviewer but I don't understand how to answer this question. any expert researcher help me to...
20 June 2024 3,802 1 View
What are the realistic applications of self-compacting geopolymer concrete in the world? Are there names of projects implemented with this concrete around the world? Please mention the names and...
20 June 2024 6,040 2 View
If you can share it with me, please email it to [email protected]. Many thanks in advance! Mohammad
19 June 2024 2,143 7 View