Dear Sir,

Regarding your question, you may consult our tutorial that can be uploaded in the following link:

http://filex.univ-brest.fr/get?k=t0CrFWR2izulvGvgMhv

In this tutorial are also listed some of our publications related to induction motors fault detection and diagnosis. Hope this will be helpful and your future questions are welcome.

Regards,

Mohamed Benbouzid

Refer my paper," Microprocessor based fault type detection.........using symmetrical component"...as the interturn fault could reduced the impedance, and unbalanced would be created........

Dear sir,

have look to the reference below 

1- A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems

2- A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors.

Dear Abhinna, 

you can use 'motor square current signature analysis' Technic for this purpose.

pl refer below mentioned IEEE paper

http://ieeexplore.ieee.org/document/7266369/

pl revert back when you implement the solution. 

Hello Manoj,

I don't have access to IEEE Xplore, do you have that paper to share with me, if you don't have an issue.

Thanks and Regards,

Abhinna