Micro-porous carbon for Li-S battery?

More Sumair Imtiaz's questions See All

Is there any company or supplier who provide sulfur composite cathodes for Li-S battery research?

I am interested to get standard sulfur cathodes like commercial cathode for LIBs. Is there any supplier where I can get it with different sulfur loading. Please let me know. TIA.

31 December 2018 4,723 1 View

Micro-porous carbon for Li-S battery

Hi Research Family, I am interested to purchase a micro-porous carbon of size less than 2 nm which is suitable for Carbonate based electrolyte for Li-S battery. Please suggest a good supplier...

01 January 1970 6,880 3 View

I modeified the separator with my material for lithium-sulfur battery. Now I want to perform it SEM and EDS. Should I need to wash the separator ?

I want to see the polysulfides retention on modified separator.I need to know whether I need to wash the separator before doing EDS or not? or if yes then with which solution? Thanks

01 January 1970 9,292 3 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

How to size battery banks?

I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...

28 February 2021 1,638 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

Luma M. Ahmed

I interest.....

Jules Lloyd Hammond

Hello Sumair Imtiaz ,

The word 'micro-porous' in your question confuses me.

Do you want the diameter of the carbon particle to be less than 2 nm, or the pore size of the carbon to be 2 nm in diameter?

I use mesoporous carbon particles from Sigma Aldrich:

https://www.sigmaaldrich.com/catalog/substance/carbonmesoporous1201133386411?lang=fr®ion=FR&attrlist=Pore%20size

Sumair Imtiaz

Jules Lloyd Hammond i mean the pore size less than 2 nm.