MATLAB Code for GFDM using Rayleigh channel ???

More Anshu Mukherjee's questions See All

How to convert 2D stack images to 3D to obtain surface area of nucleus?

I have 15 slices of the nucleus at different z-heights from confocal imaging. I would like to use these slices to reconstruct the 3D nucleus and ultimately estimate the surface area of the...

20 February 2021 6,967 1 View

How to obtain the plot of frequency shift w.r.t. pressure in a micro resonator (cc beam) based MEMS pressure sensor in COMSOL?

I need to know how to plot the impact of pressure (0 - 100 kPa) (which is applied on the back side of diaphragm) on the frequency shift caused in the cc beam supported on the diaphragm with...

01 February 2021 5,805 17 View

I want to convert Methane gas to liquid Methanol using photocatalysis. Can you please suggest me a good paper which I can study ?

There are a number of publications regarding this, but none of them are clear and show the mechanism of gaseous Methane conversion to liquid Methanol.

06 January 2021 364 3 View

Can wavelet packet sub-bands be stacked together to form an image?

I have a 1D signal and I have done wavelet packet decomposition on it which is giving several sub-bands. Can I stack these sub-bands (one below other) to form a 2D matrix and hence an image...

27 November 2020 1,269 5 View

How can I maintain a surface at isothermal condition, say at 300 deg Celsius.?

I have 6 heaters each of power 0.5 kW and mounted below a curved mild steel sheet of thickness 4 mm. The heaters and the below section is covered and insulated. I want the top surface to be...

05 November 2020 199 5 View

what are the possible reasons for Crop Water Stress Index values higher than 1 under moisture stress condition?

I have determined CWSI using the theoretical approach of Jackson et al., (1982) based on canopy temperature measurement in chickpea. at the final stages of crop growth some of my values of CWSI...

28 October 2020 9,992 3 View

Do always a Good paper depends on How much Citations it Received. I have seen many Good Research Papers with zero or less Than 10 Citations?

Its a Research Paper related Question

22 October 2020 6,179 4 View

Help in cloning, should I create 5' phosphate group on digested vector?

Hello all, I am trying to introduce an annealed DNA fragment into the double digested vector. The ssDNAs were ordered without a phosphate group modification. The vector is digested with XhoI and...

20 October 2020 8,357 5 View

Can anyone explain the calculation process of integrated biomarker response (IBR) used in chronic toxicity study with an arbitrary dataset?

Video tutorial on IBR calculation or stepwise procedure..

05 October 2020 9,279 3 View

Could someone provide the permeability value for 2% Chromium doped BiFeO3?

Any close value will also work.

03 October 2020 8,067 4 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

Timeout error!! Processor in the loop (PIL) using STM32F4 Matlab 2018a?

Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...

01 March 2021 2,327 1 View

How to eliminate Steady state error from Reinforcement learning genetic algorithm code?

The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...

28 February 2021 6,560 14 View

How to prevent ANFIS Model from negative prediction values in MATLAB?

I have input and output data set for "ANFIS modeling in MATLAB", and I am getting some negative predicted values of output in testing. However, the predicted values of output in training are...

28 February 2021 3,459 3 View

How does an AC-DC power supply Flyback Converter Based USB Charger Model using Matlab/Simulink looks like?

I am required to learn about Flyback converters and I got stuck not knowing to full design of the power supply flyback converter Based USB Charger Model using Simulink, especially the design model...

25 February 2021 5,435 2 View

Please. Could you help be in implementing Fractal Discrete Cosine Transform algorithm in Matlab?

I do need the Matlab code of Fractal Discrete Cosine Transform (FDCT). Can anyone who has already implement this code, help me with the implementation of this transform?

24 February 2021 5,602 2 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

Multi effect distillation modeling in EES?

Dear colleagues If anyone has a model of multi-effect distillation in EES or MATLAB software, please send it to me.

24 February 2021 7,282 1 View

What program can I use to caclulate dipole moment efficiently and without the need of excessive computation?

Hi, I am a third year chemistry undergrad doing my group project in which I need to predict the HPLC retention time of 20 aromatic molecules. to do this we require the chemical properties of these...

24 February 2021 1,384 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Mustafa Sadiq Aljumaily

This is the Matlab code for the OFDM over Rayleigh Channel and you can just modify it to be GFDM instead of OFDM (it depends on the availability of that in your MATLAB version).

https://www.mathworks.com/matlabcentral/fileexchange/54073-ofdm-performance-over-rayleigh-fading-channel--theory-and-simulation-

Anshu Mukherjee

My hearty thanks to both of you. And yes, I have implemented that code.

Cheyenne Tang

hi~ I am a student from China and studying in GFDM recently, can you share the code about the GFDM using Rayleigh channel ? It will help a lot!! Thanks a lot. Wish you all the best!

T Sairam Vamsi

Hi, all, I am working on channel estimation techniques for GFDM, Its very difficult for me to develop code for it, can anyone send basic codes for GFDM related estimation techniques ..

https://wwwpub.zih.tu-dresden.de/~vf5gdemo/GFDM/

this link is not working sir.. can you please provide me the valid codes for GFDM,..

Anshu Mukherjee.. can you please send your code,, it will be benefit for me to move forward for my research work

Saeed Mojtabazadeh

https://www.mathworks.com/matlabcentral/fileexchange/54073-ofdm-performance-over-rayleigh-fading-channel--theory-and-simulation

https://www.ijrte.org/wp-content/uploads/papers/v7i5s4/E10440275S419.pdf

Article Robust Precoded OSTBC for GFDM Systems