02 February 2019 3 6K Report

I want to calculate hydroxyl value of synthesized polyol for polyurethane foam fabrication. I need to know the exact hydroxyl value of the polyol. How can i measure that ? Is there any instrument available to do that?

Similar questions and discussions
Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

Determining the worth of a point improvement in Hamilton Depression Scale?

Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...

05 August 2024 3,246 1 View

Conjugation of PEG-Amine to an Amino Acid Using EDC?

I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...

31 July 2024 2,033 1 View

Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

Hi, researchers, Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

29 July 2024 4,570 0 View

My cfDNA extraction protocol using silica beads works with plasma collected in COD SAGM bags but not with plasma collected in K2 EDTA tubes. Why so?

I am currently performing cell-free DNA (cfDNA) extraction from plasma using an in-house developed kit that employs silica-coated magnetic beads. My protocol works effectively with plasma obtained...

28 July 2024 3,559 0 View

What is the Principle of Cysteine-carbazole-sulfuric acid reaction with glucose?

I have been looking for the principle of Cysteine-carbazole-sulfuric acid reaction in research papers and books, but couldn't find it. This reaction is mainly used for the quantification of...

23 July 2024 3,891 0 View

Can sulfuric acid be used to prepare anthrone reagent when it has oxidized and changed color in reaction to light?

Sulfuric acid has changed color to yellow.

16 July 2024 6,964 0 View

How do you decide an optimal AC amplitude for non-faradaic electrochemical impedance spectroscopy?

I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...

16 July 2024 5,031 1 View

How to prepare alcohol foam with high alcohol content?

Hi everybody, I wonder is there a way to prepare foam from iso-propanol/water mixture? The content of this alcohol should be 70 – 80 w.%. I plan to use silicone-based surfactants, I have several...

15 July 2024 3,539 0 View

Qiagen circulating nucleic acid kit poor yield?

Hi, Attempted to extract cfDNA from a 4 mL plasma sample, with poor yield. Went through the manual in the section regarding poor yield, and feel that this does not apply. Some potential...

14 July 2024 7,475 1 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close