am looking for a portable instrument to measure particulate matter in air. Any recommendations?
Particle size analyser is bery commonly used. Please have a look at enclosed PDF..
I am looking for a tried and trusted model of this equipment that measures PM 2.5 and PM 10.
08 September 2018 3,591 0 View
08 September 2018 4,448 0 View
I am performing adsorption experiments with various adsorbents and adsorbates. I always use Microsoft Excel to analyze my data. I wonder if there a free program that has the isotherm and kinetic...
03 April 2018 5,848 4 View
I am looking for a portable instrument to measure hydrogen sulfide, oxygen, carbon monoxide, volatile organic compounds. Any recommendations?
02 March 2018 5,609 3 View
I am looking for software that helps in teaching undergraduate students how to study the effects of the transport, dilution, and dispersion of air pollutants.
08 September 2017 4,135 5 View
I am looking for Free programs that may help in teaching Plume rise and any related subjects.
07 August 2017 5,500 1 View
07 August 2017 2,878 8 View
Thousands of researches have been conducted on the use of many agricultural wastes as adsorbents for the removal of many pollutants from wastewater. To the best of my knowledge, none of these...
01 January 1970 5,506 24 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
We have always used the 96 welled plate, the 48 welled plate but apparently there is much evidence on the 24 welled plate and above all its benefits.It states it is the same you would use on ELISA...
28 February 2021 1,149 1 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View
As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...
24 February 2021 1,349 1 View
Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...
23 February 2021 1,908 2 View
Most developing countries are not ready for e-Commerce? What dimensions and indicators are there to measure e-commerce readiness of a nation? Please share framework or model and evaluation...
22 February 2021 8,132 6 View
Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....
22 February 2021 9,972 4 View
My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...
18 February 2021 9,928 2 View
I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...
18 February 2021 1,450 3 View
How to find the air side pressure drop in a spiral fin cross flow heat exchanger? The pressure difference at the inlet and outlet is very low compared to the experimental results, which I...
18 February 2021 1,109 2 View