Hi,
I'm trying to simulate a full wave three phase rectifier with capture pspice, but can't find any part that offers a sinusoidal voltage source with adjustable phase angle along side amplitude and frequency, please share if you have any experience with this.
cordially,
Omid.
Thank you Habib.
I figured it out, for people who might have the same problem if you double click on VSIN, a page opens up and you can find a drop-down menu, look for orcad-pspice and select it, and you should see a phase option added to the table.
cordially,
Omid
One of the solutions is: You can use three phase sinewave sources as:
V1 cos wt,
V1 cos (wt + 2pi/3)
V1 cos (wt + 4 pi/3)
with V1 is either the maximum value or the effective amplitude and w is = 2 pi f, f=50Hz.
and connect them as in the usual three phase.
Sources like that can be easily defined in the SPICE based circuit simulators.
Best wishes
- Badges
- Science topic
- Similar topics
- Correction