How to merge/combine two scenarios in SimaPro software?

Can SimaPro be used to simulate/analyse Biodegradation of Specimens?

I am looking at ways to investigate the biodegradation of 3D printed specimen as part of my research. To what extent can SimaPro be used to do this? The idea is to demonstrate the biodegradation...

02 July 2024 2,730 2 View

Which LCA software would you recommend for comparative LCA of electrolysers? And is ecoinvent database alone is enough for such a assessment?

For additional information, I am a master's student looking for a LCA software to do my thesis. So a less expensive one is my first priority, but if it is not able to help me with a clarity...

18 June 2024 8,376 3 View

How to explain the difference in LCIA results from ReCIPe2016 and IMPACT World+ with literature?

Hey there, I am currently conducting a life cycle assessment and as advised, I used different life cycle impact assessment (LCIA) methods to check for robustness of results. I found that when...

03 June 2024 8,431 2 View

Hello, who is working on SimaPro software ?

is working on siHello, who mapro software ? .Because I have some question

19 May 2024 4,329 2 View

Simapro Faculty License ?

I am currently teaching a course related to life cycle assessment. So far I have used a Simapro faculty license. However, currently we can no longer use the faculty license because it is no longer...

05 May 2024 5,654 1 View

I want to do life cycle analysis based research using SimaPro software. As a beginner from which sources I can get help and proper guidelines in this?

simapro 9.8 software

20 April 2024 4,638 1 View

Request assistance in assessing the environmental impact of municipal solid waste management using the LCA method and using an application program?

I need an expert to help me in assessing the environmental impact of Municipal Solid Waste Management using one of the following programs: SimaPro. ,GaBi. ,OpenLCA. ,Wrate or any suitable software...

20 February 2024 7,755 2 View

Chemical recycling for composite materials with Simapro?

Hi All How is chemical recycling of composite materials done in Simapro?

29 October 2023 8,307 2 View

How can I find the energy footprint of a commercial product that is already available in ecoinvent?

As I would like to compare the energy footprint of a commercial product to a new one, how can I find details about a product that it is available in the ecoinvent database? Thank you

25 October 2023 6,846 0 View

What is the difference between waste/disposal scenario and waste treatment in SimaPro?what is the use of them individually?

In 'life cycle' under product stages we can give 'waste disposal' process,how does this impact the result? And under product stage there is also option to make 'waste treatment' stage.So how to...

26 September 2023 4,261 1 View

Shuraik Kader

Dear Doorgha Ragoobur ,

Please go through the following manual:

https://simapro.com/wp-content/uploads/2020/10/DatabaseManualMethods.pdf

Nashmin Elyasi

This can be done easily. First of all, Define your third scenario as a separate unit process. Then, put A and B as the inputs for your third scenario.

If you could not clearly understand, plz do not hesitate to ask!

Doorgha Ragoobur

Thank you Shuraik Kader and Nashmin Elyasi

Prabhat Vashistha

Use the first two processes to define the third one, then make assembly in the product stage. Finally, you can o the life cycle analysis of the 3 of them together.