How to get a M- θ curve ( Moment vs Rotation ) for a beam- column joint in Abaqus ?

More Roshan Kumar Mallik's questions See All

How to find section moment ,shear force , rotation for a solid element C3D8R and T3D2 truss element as SF in outfield doesn't get analyse in Abaqus?

I'm trying to model a beam-column joint in Abaqus as C3D8R as solid element for concrete and T3D2 element as rebar . Please tell me how to get these parameters ( section moment , section shear...

07 August 2019 9,232 2 View

Can anyone provide me experimental valid data of M30 concrete for concrete CDP with dt & dc value for Abaqus ?

I needed a M30 concrete data of inelastic strain vs compressive strength & dc and cracking strain vs tensile strength & dt experimental data for Abaqus .

05 June 2019 9,516 3 View

How can i find the ultimate moment of crack vs crack length in Abaqus?

I am modelling rcc beam as concrete c3d8r and rebar as t3d2 elements and using both cdp and xfem at a time. How can i obtain the ultimate moment of crack and also crack length .

04 May 2019 8,710 1 View

How can we model a Crack and crack propagation of Rcc beam in Abaqus 6.14 in detail ?

I ve modelled concrete as C3D8 and rebar as T3D2 elements as Concrete Damage plasticity model and Damage for Traction Separation Laws as Maxps Damage . Also defined XFEM crack .Also checked in...

03 April 2019 3,755 4 View

Can a Concrete Damaged Plasticity and XFEM or cohesive can be used both together for modelling of RCC beam in Abaqus ?

I want to know crack pattern and crack propagation in Rcc beam in abaqus so Please let me know which which parameters i ve to consider . And also i ve attached my model here so if u ve time then...

03 April 2019 7,147 6 View

How to measure a crack width of RCC beam in ABAQUS modelling ?

I have modelled and analysed a RCC beam in ABAQUS software and got crack pattern also but couldn't get to way to measure the width of crack.

02 March 2019 7,102 3 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

Can you connect an HPLC to a Mass Spec only at a certain time point?

Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...

11 August 2024 8,141 3 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

RNA Extraction Using Hot Borate Method No Longer Working?

I've been performing RNA extraction on cotton petiole tissue for a few months now using the method described in the following paper, a derivative of the typical hot borate method...

08 August 2024 9,882 2 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Can I use a HisTRAP column for affinity chromatography?

I'm working on selecting antibodies against a recombinant protein that has a His-tag. My idea is to first bind the recombinant protein to a HisTRAP column and then use this column for an affinity...

07 August 2024 505 3 View

Hi, please what is the best tool on Aspen plus that can help me get the best inlet temperature and pressure for cryogenic distillation?

I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...

06 August 2024 4,611 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the limitations and challenges of using machine learning for predicting concrete compressive strength in practical applications?

Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...

03 August 2024 2,546 2 View

How to perform EEG source analysis on each trial of data separately?

Hello Everyone I have a question about structure for connectivity analysis on sources. My goal: preprocess and cut data into trials create headmodels, using template MRI file perform source...

30 July 2024 2,744 1 View

Zuhair Al-Jaberi

Dear Roshan,

check this link you will find something close to your question.

https://www.researchgate.net/post/How_to_get_moment_vs_rotation_curve_for_pipe_bend_analysis_in_Abaqus_software

Thanks

Roshan Kumar Mallik

Zuhair Al-Jaberi Thank you for your link but i didn't find any helpful from that to my project.