help me
I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...
01 March 2021 6,661 3 View
We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...
25 February 2021 568 1 View
These beams have the same deep as the waffle has, and they have been detailed just like a beam for seismic requirements. Can these beams and columns act as a ductile frame?
20 January 2021 9,430 2 View
i modeled single lap joint using COMSOL Multiphysics software. i wanted to find shear and peel(normal) distribution across middle of the overlap length pls check the image attached
19 January 2021 6,845 3 View
I have extensive literature review related it, but it ends up in automotive, aerospace and energy sector applications, but didn't provided exact applications of Mg-Ti metals joined by welding
28 December 2020 6,621 1 View
An invitation for a joint research work
22 December 2020 3,720 1 View
I a writing a review article on cancer work through Mathematical modeling. If anyone interested in this work, kindly let me know
13 December 2020 7,585 10 View
The attached Joint.png showed and example case of a joint (2 continuum members are connected). There are 3 characteristics of this, 1. There is a Gap: Cause small amount of rigid body rotation and...
07 December 2020 6,603 3 View
I would like to analyze gait cycles (running) - is there a smart way for cycle detection and calculation of the angles for each joint (average/maximum) for a certain amount of cycles - without...
07 December 2020 2,586 2 View
I am not an expert at materials science. However, when I look at the literature, I read a process called cold spraying. This process is basically spraying a ductile powder (e.g. copper) onto a...
07 December 2020 5,378 2 View
