Can anyone please help me in processing SAR SLC data to generate interferogram using SNAP?

I have two scenes of the study area, one top and the other bottom. As per the tutorials and papers published, the step include coregistering the master sand slave images. However, when i try to...

24 February 2021 6,372 1 View

Regarding to presentation of pairwise comparison of data?

22 January 2021 8,648 1 View

How can we find crop transpiration (Tr) value from ETo values in Aquacrop model?

it like how we can get Tr value separately from ETo values in Aquacrop

20 December 2020 5,817 3 View

How to find load / force acting on the top face in ansys workbench?

The image attached is the representation of my application. This is an assembly of three items (top plate, bottom plate and the 5 load cells). The bottom plate is fixed and a load of 40 Kg is...

15 December 2020 1,145 6 View

Unlikely condition in the water inundation area after the cyclone?

I have done flood mapping with Sentinel 1 data for 3 districts of India (West Bengal) i.e. North Pargana, South pargana and East Medinipur. North and South Pargana are showing increasing trend in...

11 December 2020 4,714 3 View

How to calculate Area-Weighted Average Temperature at outlet in Ansys?

Suppose a fluid is flowing between two parallel plates (and exchanging heat) for 100-time steps. So, there is an area-weighted Average temperature at every 10 steps. How can I write a UDF to...

29 November 2020 6,240 2 View

Can you please recommend articles or book for in depth cocrystal information?

I am looking for information about coformer screenig, feasible method of synthesis at laboratory scale, cocrystal screening, solubility study, Dissolution study of powders, FT-IR analysis, DSC...

10 November 2020 413 6 View

How to know from DSC thermogram that cocrystals are formed or not?

I got three endotherms after doing DSC of physical mixture of Drug and coformer what this Indicate?

06 October 2020 350 4 View

What is apparent Km Value of an Enzyme, Is it different from usual Km value and Why it is important?

It is very much confusing when some papers use this term "apparent Km of an enzyme even if they use single substrate ? Not at all clear ! Please help me understanding this. Thanks in advance.

27 September 2020 3,522 7 View

What are the different revese crosslinking protocols?

I need to crosslink my cells for my experiment and at the end, I need to reverse crosslink and extract the proteins. Can anyone tell me what protocols are there for reverse crosslinking after...

23 July 2020 6,257 3 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Is there a powerful system for the security of the systems distributed on IoT systems?

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

How to choose ANN number of hidden layers and nodes?

Hello, Could you please share any interesting research explaining how to choose the number of hidden layers and nodes per layer in case of regression problems using ANN? Thank you, any help would...

01 March 2021 6,200 3 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

How to sample data to increase presence of solar panels in the images?

I am working on creating deep neural network on geospatial dataset and wanted to know how to do the sampling so that I can increase the presence of solar panels in the images. I cannot use entire...

25 February 2021 3,936 6 View

How to calculate battery consumption for IoT device?

Hi, everyone I'm working on a privacy-preserving algorithm that will apply to IoT devices. So, I need to measure the power consumption by implementing this algorithm. Any suggestion, advice,...

25 February 2021 8,749 6 View