seeing marks and breakage on tires and wandering what the cause is.
What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?
04 August 2024 1,078 1 View
I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.
29 July 2024 6,115 0 View
Hello, I'm planning a shell exchanging experiment with two marine, hermit crab species inside of a tank. I only have one tank available for this experiment. I plan on running 30-40 shell...
20 July 2024 5,676 3 View
Does anyone have the full text of this article? KELIKIAN H, RIASHI E, GLEASON J. Restoration of quadriceps function in neglected tear of the patellar tendon. Surg Gynecol Obstet. 1957...
08 June 2024 7,054 0 View
I am using SU-8 2025 to generate a high aspect ratio microchannel. I made two microchannels with the properties of: 1. width = 10 um. height = 25 um. SU - 8 2025. 2. width = 15 um. height = 37.5...
27 May 2024 6,862 2 View
I am currently conducting a study on the corrosion and wear behavior of super austenitic stainless steels, specifically focusing on tribocorrosion. I'm seeking collaboration with educational...
05 May 2024 8,690 2 View
Which wear testing method could be a best alternative to Pin on Disc for wear testing of a pearlitic ferritic DCI after laser surface melting?
16 March 2024 1,224 0 View
Any procedure or video would be helpful.
26 November 2023 7,459 1 View
Different clinicians follow different aligner wear protocols for their patients such as, 7,10 or 14 day protocol. What are your views?
14 November 2023 9,729 4 View
ASTM 4170 indicates the usage of 9 balls in a thrust bearings and the bearing ball diameter is 7.1mm. However, is it wrong if we use a 11 nos. ball thrust bearing and 6.5mm ball diameter? other...
06 November 2023 6,013 0 View