Simply by using Multimeter Measure voltages and currents specified in dialog boxes

of SimPowerSystems blocks, estimate the measured signals in your system

After running Simulink, the figures will auto appeared with possibility of change any parameter, line color, so on

In the edit or file menu, you can find copy figure to insert it in word file

To produce a scatter plot from a signal, use the scatterplot function or use the System object. A scatter plot or constellation diagram can be useful when comparing system performance to a published standard, such as 3GPP or DVB.

Save as> .fig

Dear Abdulazai M. Ghaleb, in MATLAb simulink 2013b there is no option to save as figure or print in the constellation diagram block. Maybe it available in the previous version but I need MATLAB 2013 to simulate my model.

Thanks to all.

Dear RK Sethi, thank you very much for your attention, but there is no option or any shortcut key in this block to print or save as figure. I look for an idea that I can save the results on the data file and re plot them using MATLAB command or a block that can help me to save this result. The quality of using print screen is not enough for analysis the results.

First assume that your simulation is entitled example.slx,  then follow these steps:

• sim('example')
• figure(1)
• constellation(sc)

And you have your constellation plot.

The method applies for any kind of figures. If, for example, the scope contains two curves, then you can obtain the figure in he command window by entering:

•  plot(sc(:,1),sc(:,2),'k',sc(:,1),sc(:,3),'r')

instead of the last step above.

Please try as this page guide:

http://www.mekesim.com/archives/356/

http://www.mekesim.com/archives/356/