How can I easily measure sulfate concentration in a solution?

More Rebecca Leese's questions See All

Does the absence of an overhang on an insulated ECM cathode cause an overcut?

with cathodes for ECM we insulate the avoid overcutting as per industry standard however we are wondering whether having an overhang is important to reduce overcut further? our current cathode is...

11 December 2018 1,795 0 View

Is it possible to use electroless plating to deposit a non-metal?

I am looking to coat a structure with a solid electrolyte. Can electroless plating be used or is this solely used for plating metals?

07 August 2017 7,866 8 View

What's the initial oxidation rate for pure titanium?

I'm interested to know how long it takes for the oxide layer to reform after it has been broken. Is it on the order of nanoseconds, faster, slower?

01 February 2017 1,734 3 View

How can I increase the solid content of my filter cake?

I am involved with an electrochemical machining (ECM) process which creates metal (hydr)oxides. These are currently filtered out using a filter press but the cakes are only approx. 20 % solid. We...

09 October 2016 4,649 1 View

Is a polyethersulfone (PES) ultrafiltration membrane affected by high sulfate concentrations?

We're having a problem with UF membrane fouling; we were wondering whether a high sulphate concentration in the electrolyte can affect the membrane properties or cause membrane fouling?

09 October 2016 6,284 5 View

How do you calculate a charging current during a square wave potential pulse?

Details I have are the pulse length, pulse amplitude, electrode surface area, distance between electrodes.

09 October 2012 3,622 4 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

If we are using snowball sampling technique, how do we justify the true representativeness of the sample statistically? is there any statistical test?

Are there any statistical methods to justify your sampling technique using SPSS or AMOS?

05 August 2024 9,153 4 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

How to isolate lymphocytes from mouse spleen?

I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...

04 August 2024 9,913 7 View

What are possible strategies can be used to analyze data under sequential explanatory mixed method approach?

Better ways to analyze the qualitative and quantitative data in a sequential explanatory mixed method approaches

04 August 2024 2,703 6 View

Why 3 replicates for most biological assays? Is it enough to examine the data fits normal distribution?

Just bounced on me. Before statistically analysing significant difference, shouldn't we see if data fits normal distribution first? Is 3 replicates enough to testify the hypothesis of normal...

31 July 2024 8,141 13 View

Request for Advice: Starch Metabolism Research Project?

I am currently considering a research project focusing on a comparative analysis of starch metabolism in orchids and roses. I am particularly interested in identifying the types and quantities of...

30 July 2024 4,267 2 View

How to calculate conductivity using Electrochemical Impedance Spectroscopy's Nyquist plot?

Hello everyone, I am new to this characterization but watching videos on youtube I have already plotted a Nyquist plot (Z' and -Z'') and already fitted models on my material using Zsim. But now I...

29 July 2024 1,376 0 View

Can the limit of quantification (LOQ) of an analytical method fall outside its linear dynamic range, or must it always be within it?

Can an analytical method's limit of quantification (LOQ) be outside its linear dynamic range, or is it always required to be within it? Please provide a thorough explanation supported by verified...

29 July 2024 7,198 9 View

Metin Ak

These articles may be usefull for you. ?

http://www.sciencedirect.com/science/article/pii/0039914087800589

http://pubs.acs.org/doi/abs/10.1021/acs.jchemed.5b00941?journalCode=jceda8

Johannes Daprà

EDITED: Just clicked on those articles linked by Metin Ak and see that they describe better solutions.

Dalibor M. Stanković

You can also use spectrophotometric method with BaCl2 or gravimetric method with BaCl2

Mohammed Abdalla Elsheikh

Please go to the link below may be enrich the discussion by contributing to solve the issue …. What is the simple method for measuring the sulphate in soil, water and plant?

Available from:

https://www.researchgate.net/post/What_is_the_simple_method_for_measuring_the_sulphate_in_soil_water_and_plant