Could you write a link where I can find formulas for calculation an energy which is used by node of WSN (for transfer a data)?
You can refer to the following papers:
Article Distributed Adaptive Data Collection Protocol for Improving ...
Conference Paper Distributed Data Aggregation protocol for improving lifetime...
Conference Paper Adaptive Data Collection protocol for Extending Lifetime of ...
Refer Section 2 : Article VCH-ECCR: A Centralized Routing Protocol for Wireless Sensor Networks
Dear Sergii,
I believe that you can not find a precise formula to calculate the load-dependent energy consumption of a WSN node. The load-dependent energy consumption can be estimated. The power consumption in a WSN node depends on its load - mainly on the load on its CPU. It is self-evident that a CPU with higher clock frequencies can do more and thus use more power. To save energy, a "load-dependent CPU clock" is realized. This idea was patented in the 90s - see for example:
US 5561792: Microprocessor with software switchable clock speed and drive strength, 1996
US 6076171: Information processing apparatus with CPU-load-based clock frequency, 1998
US 5996084: Method and apparatus for real-time CPU thermal management and power conservation by adjusting CPU clock frequency in accordance with CPU activity, 1998
US 5369771: Computer with transparent power-saving manipulation of CPU clock, 1994
US 5189647: Information processing system having power saving control of the processor clock, 1993
The added figure illustrates how the load-dependent energy consumption can be estimated.The following sources give some ideas:
CPU power dissipation
https://en.wikipedia.org/wiki/CPU_power_dissipation
Dynamic frequency scaling
https://en.wikipedia.org/wiki/Dynamic_frequency_scaling
Sparsh Mittal: A survey of techniques for improving energy efficiency in embedded computing systems
https://www.researchgate.net/publication/255485741_A_survey_of_techniques_for_improving_energy_efficiency_in_embedded_computing_systems
Ener-G: A Generic Approach for Modeling Energy Consumption
https://www.researchgate.net/publication/267725449_Ener-G_A_Generic_Approach_for_Modeling_Energy_Consumption
Chamara Gunaratne, Ken Christensen, Bruce Nordman and Stephen Suen: Reducing the Energy Consumption of Ethernet with Adaptive Link Rate (ALR)
http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4378356
Best regards
Anatol Badach
Dear Anatol Sir,...
I agree with the detailed info about the energy consumption with respect to processor of a sensor node. Along with that energy, there is a communication block that consumes more energy.. Roughly around 60 % of the energy consumption is due to the communication(radio) block. That also need to be included..Thank you. again...
Dear Anatol, Durda,
Thank you.
You are both right.
And I search formulas for calculation a used energy for transmission and reception information (in relation with an information volume, a speed and the number of neighbor's nodes).
Please refer the following paper also
Article Development of Protective Scheme against Collaborative Black...
to calculate the energy consumption for transmission in wsn the location information of sensor node is required.
Do you want to say that for calculation of a transfer energy of the one WSN node we need to know a location of this node?
Could you give a formula?
What about the amount of information transmitted?
- Badges
- Science topic