Hello dear experts. I am new in Antenna field and I want to learn FSS structure simulation using incident wave excitation?

Physics: Why do we describe light by referring to its wavelength, but microwaves and radar pulses by referring to their frequency?

In physics, the description of the properties of light generally refers to its wavelength (nm), while in the range of microwaves and radio waves we refer to the frequency of a signal (e.g. kHz or...

03 March 2021 1,682 3 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Kairan Zhu

Wave patterns: Plane Wave, Hertzian-Dipole Wave, Cylindrical Wave, Gaussian Beam, Linear Antenna Wave, Far Field Wave and Near Field Wave.

Set the incident wave source parameters according to the incident wave excitation equation.

Smrity Dwivedi

Hello,

Some papers are given below, which might be helpful.

Thanks,

All the best,

Dakshata Gharode

Thank you for your help. Can you please tell me whether incident wave excitation works in HFSS 15 or it requires higher version?

Thank you for your help. Can you please tell me whether incident wave excitation works in HFSS 15 or it requires higher version? Smrity Dwivedi and Kairan Zhu .

I think it works, http://www.mweda.com/hfss/hfss15/AnsysNearFieldDataFile.htm

Thank You Kairan Zhu Sir. I will check and revert back.

Hello Kairan Zhu Sir, when I try to assign incident wave excitation I get this kind of error. Can you tell me where I am going wrong.

Krunal Patel

As seen from figure you have selected the whole airbox for simulation.

Thanks @ Krunal Patel I will look into the correct method.

Thanks Pratik Ghate

. Can you please elaborate how to set a point to select amplitude and direction of K & E for incident wave excitation .

Thanks Denis Jaisson

. Can you suggest any course which can help me out. and also tell me how to grab the stick for proper excitation. I will be grateful to you for that.

Atul Varshney

Dear Dakshata,

I think you need to implement first any good already executed antenna and veryfiy their results exactly.. then you learn a lot about the HFSS.

Dhivya Priya E.L.

Hi Dakshata,

Try with the basic antenna design and HFSS itself provides a detailed step by step methods for working with it which you can see through the help button.