Some time Experience in work make engineer good designer,
Magnetic abrasive finishing (MAF) is one of advanced process which is used to machine and enhance the surface layer of parts .
10 November 2018 4,028 0 View
Which depth can be reached by magnetic abrasive finishing (MAF)?
10 November 2018 1,579 0 View
Before university Are students prepared for college?being prepared for college means,at a minimum, having the English and math knowledge and skills to succeed in entry-level, credit-bearing college
04 May 2018 10,250 18 View
The textbooks in lecture.
04 May 2018 7,337 3 View
many peoples were alarmist about their countries (decreases of water resource, natural resource, oil resource...)
03 April 2018 4,827 19 View
What have you learned from the process of doing your PhD?
03 April 2018 2,811 14 View
The limitations in writing PhD thesis.
03 April 2018 2,869 23 View
Convert mild steel into high carbon steel
02 March 2018 4,044 2 View
What are the software’s which can be useful in manufacturing unit?
02 March 2018 9,943 7 View
Difference between Production and Manufacturing?
02 March 2018 1,444 7 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...
28 July 2024 5,771 2 View
Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?
27 July 2024 648 3 View
// interested in the difference between floating events and short circuits.
22 July 2024 6,565 0 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Chemical Engineering /Food Engineering
20 July 2024 4,152 4 View
I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...
16 July 2024 3,212 5 View
I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...
10 July 2024 2,789 4 View
