Book/reference on cyclic stress-strain curves under complex loading conditions?

More Danish Khan's questions See All

How to find the mean, SD and CI in SPSS?

Hi, I hope that someone can help me with this task: I have 5 groups of participants which are numbered in SPSS from 1 to 5 (according to their group number) and are all under the variable group....

03 March 2021 506 3 View

Do you know any MR image dataset?

I would like to research on MR images (0.5T and 3T). Can you please suggest some websites that I can download dataset including both 0.5T and 3T MR images? Thank you.

02 March 2021 7,735 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

What condition required for coating of Fe3O4@SiO2 by using APTES?

I tried coating Fe3O4@ SiO2 by using APTES in 5% water-ethanol but it is not coated. Kindly suggest a solution for it. Thanks

24 February 2021 5,992 4 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

Kristaq Hazizi

I can suggest a few books and references that can help you better understand the evolution of cyclic stress-strain curves under complex loading conditions. These resources provide insights into the behavior of materials subjected to variable amplitude loading and cover various aspects of cyclic stress-strain analysis. Here are some recommendations:

"Fatigue of Materials" by S.S. Manson and G.R. Halford: This book provides a comprehensive understanding of fatigue behavior in materials, including cyclic stress-strain analysis under complex loading conditions. It covers topics such as stress-life and strain-life approaches, fatigue crack growth, and multiaxial fatigue.

"Fatigue and Durability of Structural Materials" by A. Carpinteri: This reference focuses on fatigue and durability analysis of structural materials, including the cyclic stress-strain response under complex loading conditions. It covers topics such as fatigue testing, multiaxial fatigue, and environmental effects on fatigue.

"Cyclic Plasticity of Engineering Materials: Experiments and Models" by M. De Baets and D. Taylor: This book discusses cyclic plasticity in engineering materials, including the characterization of cyclic stress-strain curves under complex loading conditions. It covers experimental techniques, constitutive models, and numerical simulations related to cyclic plasticity.

"Multiaxial Fatigue and Deformation: Testing and Prediction" edited by J. R. Yates and G. J. Plunkett: This book focuses on multiaxial fatigue and deformation analysis, including the characterization of cyclic stress-strain behavior under complex loading conditions. It covers experimental testing methods, analytical approaches, and life prediction models.

"Cyclic Deformation and Fatigue of Metals" by M.E. Fine and J.L. Hummel: This reference book explores cyclic deformation and fatigue behavior of metals, including the analysis of cyclic stress-strain curves under complex loading conditions. It covers topics such as cyclic plasticity, crack initiation and propagation, and fatigue life assessment.

These resources should provide you with valuable insights into the evolution of cyclic stress-strain curves under complex loading conditions and help you develop a deeper understanding of the subject matter. Remember to check their availability in libraries, bookstores, or online platforms.

Jagadeesh Baskaran

The best book that would suit your requirement is 'Fatigue of Materials' by Dr. Subra Suresh. The google book link is below:

https://books.google.com/books/about/Fatigue_of_Materials.html?id=j4w6frFAiQcC

Happy reading!